WUXI MAYSHEE DEVELOPING COMPANY LTD
  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
Blind Rivets Dimension
Home » News » Rivets » Blind Rivets Dimension

Blind Rivets Dimension

Views:16     Author:Site Editor     Publish Time: 2018-11-26      Origin:Site

Blind Rivets Dimension

Blind rivet dimensions

b: blind length

d: rivet diameter

dk:head diameter

dm:mandrel diameter

k: head height

l: rivets length

p:mandrel protrusion

b: blind length

<open end blind rivets> distance, measured parallel to the axis of the blind rivet, either from the underhead face of the protruding head or from the top face of the countersunk head to the extreme end of the mandrel head

<closed end blind rivets> the blind length is identical to the rivet length.

l: rivets length

distance, measured parallel to the axis of the blind rivet, either from the underhead face of the protruding head or from the top face of the countersunk head to the blind rivet end

p:mandrel protrusion

maximum length, measured parallel to the axis of the blind rivet body, of the mandrel shank protrusion from the blind rivet head, prior to setting

BLIND RIVETS GRIP DIMENSION

dh: clearance hole

hole or holes necessary to accommodate the blind rivet in the components to be fastened

g:grip length

total thickness of the components to be riveted. The grip range is the minimum and maximum grip the rivet is intended to be used with.

Note: grip range:minimum to maximum total thickness of components which can be properly fastened by a blind rivet of a given nominal length. It is very important to note that the maximum grip range is NOT the length of the rivet body. 

e:blind side protrusion

difference between the maximum blind length (b) and the minimum grip length (g)

ca:blind side axial clearance

distance between the non-access side of the component to be fastened and the surface of any part of the component opposite to the mandrel head or rivet end

Note: To be able to set the rivet properly, the blind side axial clearance has to be more than the blind side protrusion.

cr:blind side radial clearance

distance to the surface of any part of the component to be fastened, measured at right angles to the rivet axis

Note: To be able to set the rivet properly, the blind side radial clearance has to be more than the blind rivet head radius.








About Us

We are professional engaged in blind rivets, hardware and promotion gift products
Service, our experienced staff members are always available to discuss your 
Requirement and ensure full customer satisfaction...MORE>>

Link

Contact Us

TEL :  +86-510-85416250     
MOB : +86-15052123786
FAX : +86-510-85416260
EMAIL :info@allrivets.com
ADD: NO.55301,JINKE SHIJIECHENG, WUXI CHINA.
Copyright  2017 WUXI MAYSHEE DEVELOPING COMPANY LTD. ALL righs reserved. Supported  Leadong.